spec no: dsaf1343 rev no: v.1 date: mar/30/2005 page: 1 of 4 approved: j. lu checked: allen liu drawn: y.w.wang erp: 1203003838 package dimensions notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0 .1(0.004") unless otherwise noted. 3. specifications are subject to change without notice. 2.0x1.25mm smd chip led lamp features 2.0x1.25mm smt led,0.5mm max.thickness. low power consumption. wide viewing angle. ideal for backlight and indicator. various colors and lens types available. package : 2000pcs / reel. rohs compliant. aphcm2012surck - f01 hyper red description the hyper red source color devices are made with dh ingaalp on gaas substrate light emitting diode .
spec no: dsaf1343 rev no: v.1 date: mar/30/2005 page: 2 of 4 approved: j. lu checked: allen liu drawn: y.w.wang erp: 1203003838 electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c note: 1. 1/10 duty cycle, 0.1ms pulse width. selection guid e note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. part no. dice lens type iv (mcd) @ 20ma viewing angle min. typ. 2 ? 1/2 aphcm2012surck - f01 hyper red (ingaalp) water clear 50 150 110 symbol parameter device typ. max. test conditions units peak peak wavelength hyper red 650 nm i f =20ma d dominant wavelength hyper red 635 nm i f =20ma ? 1/2 spectral line half - width hyper red 28 nm i f =20ma c capacitance hyper red 35 pf v f =0v;f=1mhz v f forward voltage hyper red 1.95 2.5 v i f =20ma i r reverse current hyper red 10 ua v r = 5v parameter hyper red units power dissipation 170 mw dc forward current 30 ma peak forward current [1] 185 ma reverse voltage 5 v operating/storage temperature - 40c to +85c
spec no: dsaf1343 rev no: v.1 date: mar/30/2005 page: 3 of 4 approved: j. lu checked: allen liu drawn: y.w.wang erp: 1203003838 hyper red aphcm2012surck - f01
spec no: dsaf1343 rev no: v.1 date: mar/30/2005 page: 4 of 4 approved: j. lu checked: allen liu drawn: y.w.wang erp: 1203003838 tape specifications (units : mm ) recommended soldering pattern (units : mm ) remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters. aphcm2012surck - f01
|
